Build:Structural Integrity Field

4.5 Structural Integrity Field

(Required)
Cost: Varies
Available: 2063

The Structural Integrity Field (SIF) is a force field running through the structural integrity grid (a network of conductive elements in the hull) which provides protection against gross structural compression, or hull stress. It helps keep the ship together. The following table provides the Class of the SIF, the SU Cost, level of protection (both normal and maximum protection), and the year the specific class was introduced. An SIF is not required for vessels that operate well below impulse speeds (i.e., less than 0.1c).

In 2300, with the introduction of the Class 5 series of SIF, the other preceding (and still operational) series were re-titled as Classes 1 through 4.

(Cardassian: Since their hulls are stronger than those on most ships, the Cardassians often employ slightly weaker SIFs. Most Cardassian ships have SIFs in the Class 3-5 range. Only the largest and most powerful ships, such as the Keldon-class Heavy Warship, have Class 6 SIFs, and Class 7 SIFs are only found on ships uprated by the Dominion.)

(Pre-2063 ships: for vessels that do travel faster than 0.1c prior to the availability of SIF, increasing the resistance to twice intended will allow for some compensation for hull stress.)

Table

Table 4.5: Structural Integrity Field

Class	SU Cost	Protection	Year Available
Class A	2 + Size	5 / 5	2063
Class B	3 + Size	8 / 12	2087
Class C	4 + Size	10 / 15	2117
Class D	5 + Size	15 / 22	2125
Class E	6 + Size	20 / 30	2142
Class F	8 + Size	25 / 37	2153
Class G	9 + Size	30 / 45	2169
Class H/Class 1	12 + Size	40 / 60	2186
Class I/Class 2	15 + Size	50 / 80	2215
Class J/Class 3	18 + Size	60 / 90	2257
Class K/Class 4	21 + Size	70 / 110	2273
Class 5	24 + Size	80 / 120	2300
Class 6	27 + Size	90 / 130	2312
Class 7	30 + Size	100 / 150	2372

---

Construction Rules Index

• Back to the Table of Contents
• Back to Chapter 4.0: Hull
• On to Backup SIF