Guide:Samson

Samson
Class Overview
Category	fleet tug/tender
Operational	2261-2298 Samson (fleet tug/tender): 2261-2277 Samson Flight II (fleet tug/tender): 2276-2298
Constructed	6 Samson : 6 (built 2259-2264) Samson Flt II: 6 (converted Samsons 2275-2277)
Dimensions
Length	Flt I: towing rig retracted: 233.5 m towing rig extended: 304.2 m Flt II: towing rig retracted: xxx m towing rig extended: xxx m
Beam	Flight I: 198.9 m Flight II: xxx m
Height	Flight I: 72.1 m Flight II: xxx m
Mass	Flight I: 660,000 mt Flight II: 752,000 mt
Performance
Cruise Speed	w 6
Tow Speed	w 3 - 5
Max Speed	w 8
Endurance	5 years
Complement
Officers	4
Enlisted	48
Passengers	tender/repair missions: 44 specialists (typical) maximum: 104 specialists
Tactical Systems
Shields	1-layer conformal forcefield 1x Primary navigational deflector (port ventral primary hull) 3x Auxiliary navigational deflector emitters (ventral primary hull)
Transporters	Flight I 1x GP (3-pad); Mk III 2x emergency evacuation (22-pad); Mk III 2x cargo; Mk III Flight II 1x GP (3-pad); Mk IV 2x emergency evacuation (22-pad); Mk IV 2x cargo; Mk IV
Auxiliary Craft	2x heavy shuttles 8x work pods
Historical
Ships of Note	USS Samson (NCC-3730)
Canonicity
Design	FASA
Name	FASA
History	FASA

Perhaps unremarkable in technological terms save for her power and size, the Samson nevertheless filled an important operational niche as the top-end heavy tug of the 2260s-90s. Numerous research and defense outposts like this R series station were towed in place by the type, and the theoretical capacity also existed for recovering the heaviest Fleet combat units in case of open war breaking out. Thankfully, no Samson ever saw combat of any sort.

Although immediately following the mediumweight Master class tugs of the 2220s-30s in the registry scheme, the Samson tugs of the 2260s were among the heaviest in the Fleet arsenal. These massive vessels were intended for the tasks too daunting for Ptolemy or Keppler units to handle: recovery of stranded dreadnoughts and possible future battleships, delivery of heavy orbital outposts and other installations, trajectory correction of asteroids for industrial or military purposes…

In light of the special and specific mission of the ship, it is perhaps surprising that the design was in fact a joint venture between Star Fleet-sponsored Chiokis and the wholly commercial Rantura Shipping Lines. A civilian demand did exist for hauling equipment such as ore refineries to the newly opened frontier in as large and pre-integrated units as possible. The more complete a factory could be delivered to the distant target, the more quickly the commercial operator could begin making profit. In the untamed depths of the Treaty Exploration Zone, size also translated to security: large factories would be more likely to come under Star Fleet protection than small ones.

Between Rantura and Star Fleet, a dozen hulls were procured. The forward half of each was a conventional saucer, while the aft extensions enclosed the impulse engine assemblies and main power systems. Beneath the hull at ship centerline was the massive cylindrar pod of the telescoping towing arm, flanked by cargo holds and shuttlecraft facilities to starboard and workshops plus a navigational deflector assembly to port. Empty mass reached a cruiser-like 160,000 tons without the twin PB-31 engines outrigged on arching pylons. Yet the bulk of the vessel could be made to move with just 48 crew and four officers; an additional 44 repair crew were usually carried on tender missions, although more than a hundred skilled specialists could be accommodated if need be.

The six units registered for Star Fleet use were delivered between 2261 and 2264. All underwent an extensive overhaul and warp propulsion upgrade in the mid-2270s, eventually coming to mount LN-64F engines on new, lightweight pylons, and KR16-A customized powerplants in a slightly reshaped aft hull. No armament was ever installed, however, nor were there sensors or computing systems beyond basic navigation gear. The civilian units were delivered in essentially the same original configuration as the Star Fleet ones, even though their engine refits took different paths and resulted in a longer service life. Star Fleet was satisfied to operate the Samsons till 2298, replacing them with Doppler class heavy tugs in a somewhat delayed but highly welcome move at the turn of the century.

Gallery

• 
  Timo's interpretation
• 
• 
  Original FASA

Notes

• Adrasil: I much prefer Timo's interpretation of this heavy "lifter", especially since it transports entire stations. However, I've added the FASA perspective, as it provides a possible depiction of the 2/3rds saucer-1/3 flat deck that Timo references in the text. Both represent the refitted Flight II version, rather than the TOS-era original.

• The sidebar says the transporters were upgraded after 2274, so I determined the conversions to Flight II configuration began in 2275.

• The "extensive overhaul and warp propulsion upgrade in the mid-2270s" is presumed to take place at the same time as the 2275 transporter upgrade.

Alt Sources

• STSTCSOLDA

---

• Back to the Table of Contents
• Back to "The Final Frontier"
• Appendix A: Of Ship Statistics
• Appendix B: Glossary
• Appendix C: Star Fleet Organization - General Outline
• Appendix D: Abbreviations From Outside